As with any woodworking project, it begins with a board.
The board is made 'true'; that is, flat, and the sides 90 degrees to the face.
A scrub plane is used to thin the board.
The excess length is removed - it will be used later.
Now it starts to become a guitar - the 'head' is sawed
off at the proper angle...
And this is how it fits...
The sawn faces need to be cleaned-up for a perfect fit.
And it is time to glue the 'head' onto the 'neck'.
At this point, it's a guitar neck & and head!
Next post: The head gets a face!
Step by step I learned from this article guitar making process a to z. I'm very happy to read it. Just follow flamenco modes of music.
ReplyDelete